CISA ASIX 45/10 single-sided euro-profile half cylinder (10E304080)

Product dimensions

Compare the overall dimensions and mounting points with the documentation for the specific product.

Specifications

Key system

ASIX

Construction

Single-sided euro-profile half cylinder

Operating configuration

Key on one side

Catalogue nominal size

45/10 mm

Overall length L

54.5 mm

Side A length

44.5 mm

Side B length

10 mm

Catalogue pin count

6

Measurement reference

Central fixing-screw axis; In the original drawing, B is on the left and A on the right

Cam type

Cam adjustable to 8 positions

Housing and plug material

Brass

Dimensions and installation orientation

For this model, A=44.5 mm, B=10 mm, body L=54.5 mm; Section A is 34.5 mm longer than section B. Tabulated nominal size 45/10 identifies the order; use columns A, B and L for actual lengths.

The original drawing divides the sections at the central fixing-screw axis, with section B on the left and section A on the right. Determine orientation from the escutcheons on both door sides and the operating method; page-left and page-right do not establish inside and outside.

Operating construction and matching components

Key operation on one side; short side B is 10 mm; check the cam type against the corresponding order number.

This model has a cam adjustable to 8 positions; check cam position and lock-body compatibility together with length.

Limitations

• A and B follow the orientation of the manufacturer's original drawing and do not directly designate the inside or outside of the door; check the operating side before installation.
• Catalogue nominal sizes differ from actual measurements; adding nominal sizes must not replace L.
• The original diagram shows only the lengths of the body sections; it is not a product outline, shaft-end machining drawing or installation template.

Sources

Manufacturer documents are provided in their original language.

Related articles