Specifications
- Product series
- 46870
- Backset
- 30 mm
- Applicable door construction
- Grille door
- Body construction
- Upper and lower locking points
- Faceplate width
- 25 mm
- Case material
- Galvanized steel
- Faceplate material
- Stainless steel
- Spindle specification
- 8 mm
- Additional locking-point interface
- Threaded bushings
Selecting construction and installation dimensions
This row of 46870 has a fixed backset of 30 mm. Check the distance from the door-edge faceplate reference to the cylinder centre axis; overall case depth cannot substitute for it. Locking is provided by the upper and lower locking points, with threaded bushings; First check the upper and lower extension rods and floor-strike position.
The installation construction of Grille door must match Upper and lower locking points. Additional locking points use threaded bushings; both accessory interfaces and installation positions must match.
Check locking-point positions, door-edge strikes and internal installation space together; equal backsets alone do not establish interchangeability. Check cylinder length and trim on both sides separately for the actual door.
Limitations
- The backset diagram only explains the measurement reference from the faceplate to the cylinder axis; it is not an outline, drilling or installation drawing.
- Check cylinders, extension rods, strikes and other accessories against the specific model; accessories listed in the catalogue as available on request are not standard equipment.
- Series certification or suitability does not establish that any complete door currently meets the corresponding grade.
Sources
CISA 2026 English catalogue, PDF page 179 / printed page 175Manufacturer documents are provided in their original language.