CISA 46878 30 mm Backset Upper and lower locking points Mortise lock (146878300)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Product series

46878

Backset

30 mm

Applicable door construction

Security-shutter leaf

Body construction

Upper and lower locking points

Faceplate width

25 mm

Case material

Galvanized steel

Faceplate material

Stainless steel

Spindle specification

8 mm

Additional locking-point interface

Quick-connect bushings

Handle-to-cylinder centre distance

85 mm

Selecting construction and installation dimensions

This row of 46878 has a fixed backset of 30 mm. Check the distance from the door-edge faceplate reference to the cylinder centre axis; overall case depth cannot substitute for it. The top-and-bottom locking construction uses quick-connect bushings; check the quick-connect interface when selecting extension rods.

The installation construction of Security-shutter leaf must match Upper and lower locking points. Additional locking points use quick-connect bushings; both accessory interfaces and installation positions must match.

The handle-to-cylinder centre distance is 85 mm; this and the 30 mm backset are installation dimensions in different directions. Check cylinder length and trim on both sides separately for the actual door.

Limitations

• The backset diagram only explains the measurement reference from the faceplate to the cylinder axis; it is not an outline, drilling or installation drawing.
• Check cylinders, extension rods, strikes and other accessories against the specific model; accessories listed in the catalogue as available on request are not standard equipment.
• Series certification or suitability does not establish that any complete door currently meets the corresponding grade.

Sources

Manufacturer documents are provided in their original language.

Related articles