CISA 49250 40 mm Backset Geared roller-and-bolt mortise lock (14925040000RC)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Product series

49250

Backset

40 mm

Key system

Euro-profile cylinder

Body construction

Geared roller-and-bolt mortise lock

Transmission type

Gear drive

Case thickness

15.5 mm

Faceplate dimensions

22 × 3 mm

Faceplate material

Stainless steel

Case material

Galvanized die-cast alloy

Adjustment range

2.5–16.5 mm

Adjustment component

Roller

Additional locking points

Prepared connection

Bolt throw stages (original term Throws)

2

Construction and dimensional compatibility

The fixed backset of 40 mm is measured horizontally from the door-edge faceplate to the cylinder centre axis; it is not the overall case depth. A 15.5 mm-thick case with a 22 × 3 mm stainless-steel faceplate, using roller-and-bolt construction; Roller adjustment 2.5–16.5 mm.

The latch or roller adjustment range is different from the fixed backset; the roller version differs from a construction in which a handle retracts the latch. Check the cylinder and optional extension rods separately against the door construction.

Also check the installation space inside the door leaf, strike position and plates on both sides. An identical fixed backset does not make different constructions directly interchangeable.

Limitations

• The parameter diagram explains only the measurement reference; it is not a product outline and must not be used for drilling or installation.
• Strikes, extension rods and other accessories offered on request in the catalogue are not standard equipment.
• Statements of lock-series suitability or certification are not promises of current compliance for any complete door configuration.

Sources

Manufacturer documents are provided in their original language.

Related articles