CISA 116625300 Electric rotating-bolt multipoint lock (Backset 30 mm / Centre distance 85 mm)

CISA 116625300 faceplate width 24 mm, measured transversely between the two outer edges — Our local dimension diagram is drawn from the faceplate width in the catalogue; the upper and lower break lines do not indicate total length; this is not a product view or installation drawing.

Specifications

Series: Rotating-bolt multipoint lock
Drive type: Electric
Locking construction: Three lateral bolts and adjustable latch
Backset E: 30 mm
Faceplate width: 24 mm
Faceplate profile: U-profile
Faceplate material: Stainless steel
Cylinder interface: Euro-profile cylinder ordered separately
Centre distance: 85 mm
U-profile cross-section depth: 7 mm
Faceplate length: 2300 mm
Upper-end adjustment: 350 mm
Lower-end adjustment: 150 mm
Rated voltage: 12 V AC
Catalogue current consumption: 3.1 A
Latch adjustment: 10.5–16.5 mm

Installation dimensions and faceplate

This model has backset 30 mm, faceplate width 24 mm and centre distance 85 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either. Faceplate length 2300 mm; permitted adjustment is 350 mm at the upper end and 150 mm at the lower end; these are faceplate configuration data; they do not permit arbitrary shortening or imply automatic compatibility with a door leaf of the same height. The depth of the U-profile cross-section differs from flat-plate thickness; check the door-edge recess against the cross-section.

Locking construction and matching components

The latch positions the door leaf on closing, while the bolt provides locking; during installation, separately check the latch contact surface, bolt strike opening and cylinder operating position.

Match the 12 V AC supply and catalogue consumption of 3.1 A according to the installation instructions; do not substitute DC or assume continuous holding current.

Limitations

The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.

Sources

CISA English catalogue, printed page 239 / PDF243 page

Manufacturer documents are provided in their original language.

Define Your Requirements Before Choosing a Lock Which Documents Do You Need for a Lock?