CISA 146219350 Mechanical lock with rotating-bolt body (Backset 35 mm / Centre distance 92 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series

Rotating-bolt lock body

Drive type

Mechanical

Locking construction

Bolt and latch

Backset E

35 mm

Faceplate width

22 mm

Faceplate profile

Flat

Faceplate material

Stainless steel

Cylinder interface

Euro-profile cylinder ordered separately

Centre distance

92 mm

Latch adjustment

11–17 mm

Locking-point extension configuration

This ordering group does not list preparation for extension rods

Installation dimensions and faceplate

This model has backset 35 mm, faceplate width 22 mm and centre distance 92 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either.

Locking construction and matching components

The latch positions the door leaf on closing, while the bolt provides locking; during installation, separately check the latch contact surface, bolt strike opening and cylinder operating position.

This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.

Limitations

• The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
• Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.

Sources

Manufacturer documents are provided in their original language.

Related articles