Specifications
- Series
- Rotating-bolt multipoint lock
- Drive type
- Mechanical
- Locking construction
- Three lateral bolts and adjustable roller
- Backset E
- 35 mm
- Faceplate width
- 24 mm
- Faceplate profile
- Flat
- Faceplate material
- Stainless steel
- Cylinder interface
- Euro-profile cylinder ordered separately
- Faceplate thickness
- 3 mm
- Faceplate length
- 2300 mm
- Upper-end adjustment
- 350 mm
- Lower-end adjustment
- 150 mm
- Roller adjustment
- 2.5–16.5 mm
Installation dimensions and faceplate
This model has backset 35 mm and faceplate width 24 mm. When checking the door-edge recess, also confirm the actual fixing-hole and cylinder positions. Faceplate length 2300 mm; permitted adjustment is 350 mm at the upper end and 150 mm at the lower end; these are faceplate configuration data; they do not permit arbitrary shortening or imply automatic compatibility with a door leaf of the same height.
Locking construction and matching components
The adjustable roller positions the door leaf, while the bolt provides locking. Check roller contact and the bolt strike opening separately; do not treat the roller as a handle-operated latch.
This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.
Limitations
- The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
- Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.
Sources
CISA English catalogue, printed page 243 / PDF247 pageManufacturer documents are provided in their original language.