Name: CISA 148916350 3 SCROCCHI Mechanical lock (Backset 35 mm / Centre distance 92 mm)
Brand: CISA

CISA 148916350 — Official series illustration, not a photo of this exact size variant; consult model specifications. — Official series illustration, not a photo of this exact size variant; consult model specifications.Image source

CISA 148916350 faceplate width 24 mm, measured transversely between the two outer edges — Our local dimension diagram is drawn from the faceplate width in the catalogue; the upper and lower break lines do not indicate total length; this is not a product view or installation drawing.

Lock and fitting dimensions

Dimensions from model documentation
Specifications	Dimensions from model documentation
Faceplate width	24 mm
Centre distance	92 mm
Faceplate thickness	3 mm
Faceplate length	2300 mm

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Browse related directory

Specifications

Series: 3 SCROCCHI
Drive type: Mechanical
Locking construction: Three lateral latches
Backset E: 35 mm
Faceplate width: 24 mm
Faceplate profile: Flat
Faceplate material: Galvanized steel
Cylinder interface: Euro-profile cylinder ordered separately
Centre distance: 92 mm
Faceplate thickness: 3 mm
Faceplate length: 2300 mm
Upper-end adjustment: 350 mm
Lower-end adjustment: 150 mm

Installation dimensions and faceplate

This model has backset 35 mm, faceplate width 24 mm and centre distance 92 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either. Faceplate length 2300 mm; permitted adjustment is 350 mm at the upper end and 150 mm at the lower end; these are faceplate configuration data; they do not permit arbitrary shortening or imply automatic compatibility with a door leaf of the same height.

Locking construction and matching components

The latch positions the door leaf on closing, while the bolt provides locking; during installation, separately check the latch contact surface, bolt strike opening and cylinder operating position.

This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.

Limitations

The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.

Sources

CISA English catalogue, printed page 237 / PDF241 page

Manufacturer documents are provided in their original language.

Define Your Requirements Before Choosing a Lock Which Documents Do You Need for a Lock?