Name: CISA 14965640000RC Multitop MAX RC Mechanical lock (Backset 40 mm / Centre distance 85 mm)
Brand: CISA

CISA 14965640000RC — Official series illustration, not a photo of this exact size variant; consult model specifications. — Official series illustration, not a photo of this exact size variant; consult model specifications.Image source

CISA 14965640000RC faceplate width 24 mm, measured transversely between the two outer edges — Our local dimension diagram is drawn from the faceplate width in the catalogue; the upper and lower break lines do not indicate total length; this is not a product view or installation drawing.

Lock and fitting dimensions

Dimensions from model documentation
Specifications	Dimensions from model documentation
Faceplate width	24 mm
Centre distance	85 mm
Faceplate length	2300 mm

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Browse related directory

Specifications

Series: Multitop MAX RC
Drive type: Mechanical
Locking construction: Four hooks with hardened-steel inserts
Backset E: 40 mm
Faceplate width: 24 mm
Faceplate profile: U-profile
Faceplate material: Stainless steel
Cylinder interface: Euro-profile cylinder ordered separately
Centre distance: 85 mm
U-profile cross-section depth: 5 mm
Faceplate length: 2300 mm
Upper-end adjustment: 350 mm
Lower-end adjustment: 150 mm
Latch adjustment: 11–17 mm

Installation dimensions and faceplate

This model has backset 40 mm, faceplate width 24 mm and centre distance 85 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either. Faceplate length 2300 mm; permitted adjustment is 350 mm at the upper end and 150 mm at the lower end; these are faceplate configuration data; they do not permit arbitrary shortening or imply automatic compatibility with a door leaf of the same height. The depth of the U-profile cross-section differs from flat-plate thickness; check the door-edge recess against the cross-section.

Locking construction and matching components

The four hooks have hardened-steel inserts; the strikes must match both hook engagement and the locking-point positions at both ends; an ordinary sliding-bolt strike plate cannot simply be reused.

This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.

Limitations

The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.

Sources

CISA English catalogue, printed page 231 / PDF235 page

Manufacturer documents are provided in their original language.

Define Your Requirements Before Choosing a Lock Which Documents Do You Need for a Lock?