Specifications
- Series
- Multitop MATIC
- Drive type
- Mechanical
- Locking construction
- Automatic three-point latch/bolt
- Backset E
- 45 mm
- Faceplate width
- 24 mm
- Faceplate profile
- Flat
- Faceplate material
- Stainless steel
- Cylinder interface
- Euro-profile cylinder ordered separately
- Centre distance
- 85 mm
- Faceplate thickness
- 3 mm
- Faceplate length
- 2300 mm
- Upper-end adjustment
- 350 mm
- Lower-end adjustment
- 150 mm
- Main latch adjustment
- 10–16 mm
- Automatic reset sensor adjustment
- 9–15 mm
Installation dimensions and faceplate
This model has backset 45 mm, faceplate width 24 mm and centre distance 85 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either. Faceplate length 2300 mm; permitted adjustment is 350 mm at the upper end and 150 mm at the lower end; these are faceplate configuration data; they do not permit arbitrary shortening or imply automatic compatibility with a door leaf of the same height.
Locking construction and matching components
The automatic locking construction uses an adjustable reset sensor to interact with the door frame. Check the main-latch adjustment range of 10–16 mm and the sensor adjustment range of 9–15 mm separately; one position cannot substitute for the other. The mechanical configuration on this page does not indicate that a motor or hold-open accessory is supplied.
This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.
Limitations
- The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
- Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.
Sources
CISA English catalogue, printed page 203 / PDF207 pageManufacturer documents are provided in their original language.