CISA 14A210450 Multitop MATIC Mechanical lock (Backset 45 mm / Centre distance 92 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series

Multitop MATIC

Drive type

Mechanical

Locking construction

Automatic three-point latch/bolt

Backset E

45 mm

Faceplate width

24 mm

Faceplate profile

U-profile

Faceplate material

Stainless steel

Cylinder interface

Euro-profile cylinder ordered separately

Centre distance

92 mm

U-profile cross-section depth

7 mm

Faceplate length

2300 mm

Upper-end adjustment

350 mm

Lower-end adjustment

150 mm

Main latch adjustment

10–16 mm

Automatic reset sensor adjustment

9–15 mm

Installation dimensions and faceplate

This model has backset 45 mm, faceplate width 24 mm and centre distance 92 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either. Faceplate length 2300 mm; permitted adjustment is 350 mm at the upper end and 150 mm at the lower end; these are faceplate configuration data; they do not permit arbitrary shortening or imply automatic compatibility with a door leaf of the same height. The depth of the U-profile cross-section differs from flat-plate thickness; check the door-edge recess against the cross-section.

Locking construction and matching components

The automatic locking construction uses an adjustable reset sensor to interact with the door frame. Check the main-latch adjustment range of 10–16 mm and the sensor adjustment range of 9–15 mm separately; one position cannot substitute for the other. The mechanical configuration on this page does not indicate that a motor or hold-open accessory is supplied.

This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.

Limitations

• The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
• Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.

Sources

Manufacturer documents are provided in their original language.

Related articles