Name: CISA 14A300350 Multitop MATIC Mechanical lock (Backset 35 mm / Centre distance 85 mm)
Brand: CISA

CISA 14A300350 — Official series illustration, not a photo of this exact size variant; consult model specifications. — Official series illustration, not a photo of this exact size variant; consult model specifications.Image source

CISA 14A300350 faceplate width 24 mm, measured transversely between the two outer edges — Our local dimension diagram is drawn from the faceplate width in the catalogue; the upper and lower break lines do not indicate total length; this is not a product view or installation drawing.

Lock and fitting dimensions

Dimensions from model documentation
Specifications	Dimensions from model documentation
Faceplate width	24 mm
Centre distance	85 mm
Faceplate thickness	3 mm

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Browse related directory

Specifications

Series: Multitop MATIC
Drive type: Mechanical
Locking construction: Automatic single-point latch/bolt
Backset E: 35 mm
Faceplate width: 24 mm
Faceplate profile: Flat
Faceplate material: Stainless steel
Cylinder interface: Euro-profile cylinder ordered separately
Centre distance: 85 mm
Faceplate thickness: 3 mm
Main latch adjustment: 10–16 mm
Automatic reset sensor adjustment: 9–15 mm

Installation dimensions and faceplate

This model has backset 35 mm, faceplate width 24 mm and centre distance 85 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either.

Locking construction and matching components

The automatic locking construction uses an adjustable reset sensor to interact with the door frame. Check the main-latch adjustment range of 10–16 mm and the sensor adjustment range of 9–15 mm separately; one position cannot substitute for the other. The mechanical configuration on this page does not indicate that a motor or hold-open accessory is supplied.

This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.

Limitations

The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.

Sources

CISA English catalogue, printed page 206 / PDF210 page

Manufacturer documents are provided in their original language.

Define Your Requirements Before Choosing a Lock Which Documents Do You Need for a Lock?