Name: CISA 14P310450 Multitop MATIC EXIT Mechanical lock (Backset 45 mm / Centre distance 92 mm)
Brand: CISA

CISA 14P310450 — Official series illustration, not a photo of this exact size variant; consult model specifications. — Official series illustration, not a photo of this exact size variant; consult model specifications.Image source

CISA 14P310450 faceplate width 24 mm, measured transversely between the two outer edges — Our local dimension diagram is drawn from the faceplate width in the catalogue; the upper and lower break lines do not indicate total length; this is not a product view or installation drawing.

Lock and fitting dimensions

Dimensions from model documentation
Specifications	Dimensions from model documentation
Faceplate width	24 mm
Centre distance	92 mm
Faceplate thickness	3 mm
Handle spindle	8 mm

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Browse related directory

Specifications

Series: Multitop MATIC EXIT
Drive type: Mechanical
Locking construction: Automatic escape lock
Backset E: 45 mm
Faceplate width: 24 mm
Faceplate profile: Flat
Faceplate material: Stainless steel
Cylinder interface: Euro-profile cylinder ordered separately
Centre distance: 92 mm
Faceplate thickness: 3 mm
Main latch adjustment: 10–16 mm
Automatic reset sensor adjustment: 9–15 mm
Escape operating function: A
Handle spindle: 8 mm

Installation dimensions and faceplate

This model has backset 45 mm, faceplate width 24 mm and centre distance 92 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either.

Locking construction and matching components

Function A: opening from inside through the matching escape device; the key operates latch and bolt from outside. The lock body must be paired with the devices, strike plates and door-leaf systems listed in the catalogue; the lock body alone does not establish certification of the complete door.

This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.

Limitations

The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.

Sources

CISA English catalogue, printed page 214 / PDF218 page

Manufacturer documents are provided in their original language.

Define Your Requirements Before Choosing a Lock Which Documents Do You Need for a Lock?