CISA Marine Type 126022600 U-shackle padlock | clearance 35×37.5 mm

Padlock and shackle dimensions

Compare the shackle diameter, inside width and length with the hasp openings. Check clearance for opening.

Specifications

Series / key system

Marine Type

Construction

U-shackle padlock

Body width A

60 mm

Shackle clear width C

35 mm

Shackle diameter D

10 mm

Shackle clear height L

37.5 mm

Body thickness S

20 mm

Lock body material

Solid brass, chrome-plated

Shackle material

Stainless steel

Catalogue pin count

5

Clearance and hasp compatibility

This model has shackle clearance C=35 mm, L=37.5 mm, and shackle diameter D=10 mm; Body width A=60 mm, thickness S=20 mm.

C is the clear width between the inner sides of the shackle, and L is the clear height beneath it; D describes the shackle bar diameter. Hasp hole diameter and spacing are different constraints; sufficient clear height alone does not establish that the shackle can pass through.

Keys, materials and construction scope

Marine Type locks both sides of the shackle and lists a bolt anti-tamper device and chrome-plated brass protection plate. The Marine name and stainless steel material do not establish suitability for underwater use or a salt-spray test duration.

The table model is 26022, while the LIM key-profile note at the top of the page states 26020.50/60; the two numbers differ, so this page does not use that sentence to determine this model's LIM key configuration.

Limitations

• Catalogue dimensions are for preliminary selection; Product outline, opening clearance and supplied configuration follow the manufacturer's instructions for the corresponding model.
• The original diagram explains only the three measurement directions C, L and D; it does not show the actual lock-body outline, scale or protection grade.

Sources

Manufacturer documents are provided in their original language.

Related articles