CISA 144220350 Bolt-and-latch lock (Backset 35 mm, faceplate 16 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Construction

Bolt-and-latch lock

Backset E

35 mm

Faceplate width

16 mm

Case finish

Galvanized

Faceplate finish

Galvanized

Cylinder interface

Oval cylinder, ordered separately

Locking throws (Throws)

1

Centre distance

69 mm

Latch handing

Non-handed

Key-operated latch

Supported

Installation dimensions and interfaces

Catalogue backset E is 35 mm; faceplate width is 16 mm. Check the two dimensions separately; Measure faceplate width between the left and right outer edges; check the actual backset installation reference against the complete model drawing, without substituting door thickness.

The oval cylinder's profile and fixing method must be matched separately; a euro-profile cylinder is not a direct substitute.

Locking and operating conditions

This model has backset 35 mm; the key can operate the latch. Bolt locking has 1 throws; check the 69 mm centre distance together with the existing cylinder and handle positions.

Limitations

• Check overall faceplate length, fixing-hole positions and actual strike-opening dimensions against the full installation drawing; the faceplate-width diagram is not a drilling template.
• The catalogue's electric-model voltage and current do not apply to the mechanical construction on this page; this page does not infer a fire rating or a security grade for the complete door.

Sources

Manufacturer documents are provided in their original language.

Related articles