ISEO 602DF Faceplate type (catalogue group name) 38 mm centre distance 0.5 mm projection security-door lock (00612003802F1)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series / construction group

602DF Faceplate type (catalogue group name)

Locking construction

Deadbolt only

Nominal catalogue projection

0.5 mm

Bolt centre distance

38 mm

Key system

Double-bit key

Locking points

3

Faceplate

Chrome-plated steel faceplate

Operating component layout

Keyhole at the bottom

Finish

Zinc plated

Main deadbolt throw

40 mm (600 General specifications of the double-bit series)

Main lock locking turns

4 turns

Construction and application

ISEO 602DF Faceplate type (catalogue group name) 00612003802F1 is a deadbolt-only security-door lock case, Bolt centre distance 38 mm, Nominal catalogue projection 0.5 mm. Key system: Double-bit key; Faceplate: Chrome-plated steel faceplate; Operating component layout: Keyhole at the bottom.

Door and hole compatibility

First check the distance between adjacent bolt axes 38 mm, then check the catalogue projection 0.5 mm and the receiving positions in the frame. Check hole positions and backset omitted from this group description against the complete installation drawing; do not infer them from the order code. Keyhole at the bottom; even with the same centre distance, another layout may require different door cutouts.

Selection and ordering comparison

A deadbolt-only construction does not provide normal latch closing. Check how the original door closes in everyday use; a model with a latch differs by more than an additional key.

Limitations

• Bolt centre distance, catalogue projection, throw and backset are different dimensions and must not be used interchangeably.
• Optional catalogue functions are not treated as standard equipment. This page does not guarantee a security rating for the complete door or compatibility on site.
• Confirm keys, cylinder, mounting accessories and packaging with the manufacturer for the complete order configuration.

Sources

Manufacturer documents are provided in their original language.

Related articles