ISEO 7046010 Mortice lock with built-in latch (Backset 60 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Construction

Mortice lock with built-in latch

Backset E

60 mm

Faceplate dimensions

160×16×3 mm

Lock-case height

44 mm

Key or cylinder interface

Oval cylinder

Locking form

Lateral locking

Deadbolt throw

One throw of 9 mm

Door handle spindle

8 mm

Closing component

Built-in latch

Faceplate material

Zinc-plated steel

Cutout and operation compatibility

This model has a 60 mm backset and 160×16×3 mm faceplate. Before replacing it, separately check the distance from faceplate to operating axis, the faceplate mortice and clearance for the 44 mm lock case. Door thickness cannot replace backset measurement.

The 16 mm faceplate width must match the profile groove; matching 60 mm backsets do not remove the need to check width. A key or 8 mm handle spindle can operate the latch; check the existing handle spindle interface before replacement.

Key and packaging configuration

Other catalogue order numbers with the same lock-case construction: 704601S; check key length or packaging configuration.

Limitations

• Catalogue specifications do not establish compliance with site fire or escape door requirements; check against the specific door application.
• Confirm the included striking plates, rods, cylinder and power supply against the ordering configuration.

Sources

Manufacturer documents are provided in their original language.

Related articles