Lock and fitting dimensions
| Specifications | Dimensions from model documentation |
|---|---|
| Backset E | 70 mm |
| Faceplate dimensions | 160×16×3 mm |
| Lock-case height | 64 mm |
| Deadbolt throw | Two throws, each 10 mm |
Check the backset, centre distance, faceplate and mounting points against the specific model drawing.
Browse related directorySpecifications
- Construction
- Lateral-latch mortice lock
- Backset E
- 70 mm
- Faceplate dimensions
- 160×16×3 mm
- Lock-case height
- 64 mm
- Key or cylinder interface
- Oval cylinder
- Deadbolt throw
- Two throws, each 10 mm
- Closing component
- Built-in latch
- Door handle spindle
- 8 mm
- Faceplate material
- Zinc-plated steel
Cutout and operation compatibility
This model has a 70 mm backset and 160×16×3 mm faceplate. Before replacing it, separately check the distance from faceplate to operating axis, the faceplate mortice and clearance for the 64 mm lock case. Door thickness cannot replace backset measurement.
The 710 configuration uses an oval cylinder. Whether an existing cylinder can be reused depends on its profile and connection position, not backset alone.
Limitations
- Catalogue specifications do not establish compliance with site fire or escape door requirements; check against the specific door application.
- Confirm the included striking plates, rods, cylinder and power supply against the ordering configuration.
Sources
ISEO Catalogue 02 .42, pages 2-250Manufacturer documents are provided in their original language.