Lock and fitting dimensions
| Specifications | Dimensions from model documentation |
|---|---|
| Backset E | 25 mm |
| Faceplate dimensions | 290×24×3 mm |
Check the backset, centre distance, faceplate and mounting points against the specific model drawing.
Browse related directorySpecifications
- Series
- Electa mechanical lock
- Locking arrangement
- Single lateral point
- Backset E
- 25 mm
- Faceplate dimensions
- 290×24×3 mm
- Faceplate profile
- Flat
- Faceplate material
- Stainless steel
- Locking component
- Rotating deadbolt
- Cylinder interface
- Euro-profile cylinder
- Main bolt throw
- 24 mm
Faceplate and installation dimensions
This model's backset E is 25 mm, the horizontal distance from the faceplate reference to the cylinder operating axis. Faceplate specification 290×24×3 mm must be checked together with the door-edge mortice; door thickness cannot replace backset.
This model has a flat faceplate; check length, width and thickness separately rather than replacing solely on similar appearance.
Locking construction and accessories
This configuration lists only a rotating deadbolt, without a latch or roller; the means of keeping the door leaf closed must be separately incorporated into the complete door design.
This is a single lateral locking point; when replacing it, check the frame keep, cylinder position and faceplate mortice together. Faceplate width alone does not establish interchangeability.
Limitations
- Striking plates and matching accessories are ordered separately according to the original catalogue; this page's dimension diagram is not a drilling or installation template.
- Confirm door handing, keep positions and complete installation requirements from this model's instructions.
Sources
ISEO Catalogue 02 .42, pages 2-201Manufacturer documents are provided in their original language.