ISEO 781301B Electa Lock with rotary bolt and adjustable latch (Backset 30 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series

Electa mechanical lock

Locking arrangement

Single lateral point

Backset E

30 mm

Faceplate dimensions

290×24×3 mm

Faceplate profile

Flat

Faceplate material

Stainless steel

Locking component

Rotating deadbolt and adjustable latch

Cylinder interface

Euro-profile cylinder

Main bolt throw

24 mm

Latch

Independent and reversible, adjustable from 10–15 mm

Handle spindle

8 mm

Faceplate and installation dimensions

This model's backset E is 30 mm, the horizontal distance from the faceplate reference to the cylinder operating axis. Faceplate specification 290×24×3 mm must be checked together with the door-edge mortice; door thickness cannot replace backset.

This model has a flat faceplate; check length, width and thickness separately rather than replacing solely on similar appearance.

Locking construction and accessories

The independent reversible latch adjusts from 10–15 mm and can be operated by a key or 8 mm handle spindle. Check door handing and the latch contact position on the striking plate.

This is a single lateral locking point; when replacing it, check the frame keep, cylinder position and faceplate mortice together. Faceplate width alone does not establish interchangeability.

Limitations

• Striking plates and matching accessories are ordered separately according to the original catalogue; this page's dimension diagram is not a drilling or installation template.
• Confirm door handing, keep positions and complete installation requirements from this model's instructions.

Sources

Manufacturer documents are provided in their original language.

Related articles