ISEO 782350B Electa Top/bottom rod locking mechanism (Backset 35 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series

Electa mechanical lock

Locking arrangement

Upper and lower locking

Backset E

35 mm

Faceplate dimensions

290×24×3 mm

Faceplate profile

Flat

Faceplate material

Stainless steel

Locking component

Upper and lower rod locking

Cylinder interface

Euro-profile cylinder

Rod system

Clip-in connection (clutch connection)

Faceplate and installation dimensions

This model's backset E is 35 mm, the horizontal distance from the faceplate reference to the cylinder operating axis. Faceplate specification 290×24×3 mm must be checked together with the door-edge mortice; door thickness cannot replace backset.

This model has a flat faceplate; check length, width and thickness separately rather than replacing solely on similar appearance.

Locking construction and accessories

This model locks through upper and lower rods; the catalogue lists it separately from lateral deadbolt and three-point constructions. Upper/lower rods, connectors and keeps must be matched as a complete system.

This configuration uses Clip-in connection (clutch connection); do not interchange threaded rods directly with clip-in rods. Rods, auxiliary locks and striking plates form a matched system and must be selected from the original catalogue accessory list.

Limitations

• Striking plates and matching accessories are ordered separately according to the original catalogue; this page's dimension diagram is not a drilling or installation template.
• Confirm door handing, keep positions and complete installation requirements from this model's instructions.

Sources

Manufacturer documents are provided in their original language.

Related articles