ISEO 785101352 Electa Lock with rotary bolt and adjustable latch (Backset 35 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series

Electa mechanical lock

Locking arrangement

Three lateral locking points

Backset E

35 mm

Faceplate dimensions

1860×24×6 mm

Faceplate profile

U-shaped

Faceplate material

Stainless steel

Locking component

Rotating deadbolt and adjustable latch

Cylinder interface

Euro-profile cylinder

Main bolt throw

24 mm

Rod system

Continuous long faceplate and auxiliary locks at both ends

Latch

Independent, reversible and adjustable

Handle spindle

8 mm

Auxiliary locks at both ends

Rotating deadbolts, each with 24 mm throw; vertically adjustable

Faceplate and installation dimensions

This model's backset E is 35 mm, the horizontal distance from the faceplate reference to the cylinder operating axis. Faceplate specification 1860×24×6 mm must be checked together with the door-edge mortice; door thickness cannot replace backset.

The third dimension of the U-shaped faceplate is section depth, not flat-plate thickness.

Locking construction and accessories

The main lock has a reversible adjustable latch operated by key or 8 mm handle spindle; each end has a rotating-deadbolt auxiliary lock.

This is a multipoint lock with a continuous long faceplate; faceplate length is not the compatible door height. The end auxiliary locks can be adjusted vertically, but specific positions must still follow the frame keeps and installation instructions.

Limitations

• Striking plates and matching accessories are ordered separately according to the original catalogue; this page's dimension diagram is not a drilling or installation template.
• Confirm door handing, keep positions and complete installation requirements from this model's instructions.

Sources

Manufacturer documents are provided in their original language.

Related articles