ISEO 7C2425302 ShutterTop 2.0 Two-point shutter/grille-door lock (Backset 30 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series

ShutterTop 2.0

Application

Grilles, shutters and gates

Locking arrangement

Two points

Backset E

30 mm

Faceplate dimensions

350×25×3 mm

Faceplate material

Stainless steel

Rod interface

Preinstalled M8 connectors

Rod throw

25 mm

Operating method

Driven by 8 mm handle spindle; cylinder locks the handle

Cylinder interface

Euro-profile cylinder

Backset and faceplate compatibility

Faceplate dimensions are 350×25×3 mm and backset E is 30 mm. E is the horizontal distance from the faceplate reference to the cylinder operating axis and cannot be replaced by door thickness; faceplate width and thickness must also match the door-edge mortice.

Operating construction and selection

The two-point version locks through upper and lower rods; the three-point version's 28.5 mm hook-bolt throw cannot represent this model. The catalogue gives a rod throw of 25 mm. In this configuration, locking is driven by an 8 mm handle spindle, and the cylinder locks the handle.

M8 connectors must match the corresponding rods, rod ends and keeps. The 350 mm faceplate length cannot establish compatible door height; also check through-hole positions and the cylinder guard against the complete installation drawing.

Limitations

• The diagram on this page explains only backset, not mounting hole positions; check the manufacturer's drawings for complete keep and connector dimensions.
• Product dimensions and construction do not establish a security grade for the complete door or certification for a particular application.

Sources

Manufacturer documents are provided in their original language.

Related articles