ISEO 910235 Vis Security rim lock

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Locking layout

3 locking points

Inside operation

Key guide hole

Outside pump-cylinder length

50 mm

Handing configuration

Reversible

Lateral cylindrical bolts

2 rods, diameter 16 mm

Lateral bolt travel

Single throw of 27 mm

Top-and-bottom rod connection travel

26 mm

Rod connector projection

35 mm

Rod guide

2 pieces

Outside cylinder sleeve diameter

33 mm

Construction and implications for selection

910235 has a 50 mm-long external pump cylinder and an interior key guide hole. In this configuration, the single lateral throw of 27 mm is linked to 26 mm travel of the upper and lower rods. For replacement, first distinguish the locking direction, then check rod-end interfaces or lateral strikes; similar case outlines alone do not allow mixing.

Pre-replacement checklist

When ordering, provide the full model 910235 and check Locking layout: 3 locking points; Inside operation: Key guide hole; Outside pump-cylinder length: 50 mm; Handing configuration: Reversible; Lateral cylindrical bolts: 2, diameter 16 mm; Lateral bolt travel: single throw of 27 mm; Top-and-bottom rod connection travel: 26 mm; Rod connector projection: 35 mm; Rod guides: 2; Outside cylinder sleeve diameter: 33 mm. Also retain photographs of the installation positions of the original lock, strikes and connectors; overall dimensions, hole spacing and travel describe different measurement references and must not replace one another.

Limitations

• Outside cylinder length is not a guaranteed door thickness; subtract the space occupied by inside/outside guards and fixing construction before checking.
• The catalogue does not specify the latch configuration; omission of the word latch does not prove that no latch is present.
• This page is a configuration record from catalogue .42; confirm current supply, replacement models and complete installation conditions with the manufacturer.

Sources

Manufacturer documents are provided in their original language.

Related articles