ISEO 911005/D Perfecta Lateral security rim lock

Lock and fitting dimensions

No verified dimensions in this record. Check the manufacturer drawing before ordering.

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Locking layout

Lateral locking

Handing

Right-handed

Inside operation

Key guide hole

Outside pump-cylinder length

50 mm

Lateral cylindrical bolts

5 rods, diameter 18 mm

Lateral bolt action

4 throws, 10 mm per throw

Construction and implications for selection

911005/D is right-handed, with inside Key guide hole and outside pump-cylinder length 50 mm. Its locking positions are arranged through lateral strikes; the 5 lateral bolts of 18 mm diameter operate through 4 throws of 10 mm each. Cylinder length describes the through-door configuration and cannot replace lock-body backset; Handing must also match door opening and strike positions.

Pre-replacement checklist

When ordering, provide the full model 911005/D and check Locking layout: Lateral locking; Handing: Right-handed; Inside operation: Key guide hole; Outside pump-cylinder length: 50 mm; Lateral cylindrical bolts: 5, diameter 18 mm; Lateral bolt action: 4 throws, 10 mm per throw. Also retain photographs of the installation positions of the original lock, strikes and connectors; overall dimensions, hole spacing and travel describe different measurement references and must not replace one another.

Limitations

• Determine catalogue model handing from the manufacturer's installation drawing; Left and right after changing viewing position must not be taken directly as product handing.
• This model row gives no burglary-resistance certification grade; locking-point count is not a certification grade.
• This page is a configuration record from catalogue .42; confirm current supply, replacement models and complete installation conditions with the manufacturer.

Sources

Manufacturer documents are provided in their original language.

Related articles