CISA C2000 30/33 double-key euro-profile cylinder (10G300080)

Cylinder dimensions

Measure both sides from the fixing screw. Check the cylinder profile, cam and version.

Specifications

Key system

C2000

Construction

Double-key euro-profile cylinder

Operating configuration

Key on both sides

Catalogue nominal size

30/33 mm

Overall length L

62 mm

Side A length

29.5 mm

Side B length

32.5 mm

Catalogue pin count

5

Measurement reference

Central fixing-screw axis; In the original drawing, B is on the left and A on the right

Housing and plug material

Brass

Cam type

DIN-compatible projecting cam in self-lubricating sintered steel

Dimensions and installation orientation

For this model, A=29.5 mm, B=32.5 mm, body L=62 mm; Section B is 3 mm longer than section A. Tabulated nominal size 30/33 identifies the order; use columns A, B and L for actual lengths.

The original drawing divides the sections at the central fixing-screw axis, with section B on the left and section A on the right. Determine orientation from the escutcheons on both door sides and the operating method; page-left and page-right do not establish inside and outside.

Operating construction and matching components

Key operation at both ends. The housing and plug are brass; the DIN-compatible projecting cam is self-lubricating sintered steel; check the door-lock cam interface; do not select solely by overall length.

Limitations

• A and B follow the orientation of the manufacturer's original drawing and do not directly designate the inside or outside of the door; check the operating side before installation.
• Catalogue nominal sizes differ from actual measurements; adding nominal sizes must not replace L.
• The original diagram shows only the lengths of the body sections; it is not a product outline, shaft-end machining drawing or installation template.

Sources

Manufacturer documents are provided in their original language.

Related articles