Name: CISA C2000 35/10 single-sided euro-profile half cylinder (10G304070)
Brand: CISA

CISA 10G304070 — Official series illustration, not a photo of this exact size variant; consult model specifications. — Official series illustration, not a photo of this exact size variant; consult model specifications.Image source

CISA 10G304070: B 10 mm, A 34.5 mm, body L 44.5 mm — original measurement diagram — Our original section-measurement diagram follows the original drawing: B left, A right, divided at the central fixing-screw axis. L describes only the body, excluding the projecting shaft or knob. Not to scale; not a product outline or installation drawing.

Product dimensions

Dimensions from model documentation
Specifications	Dimensions from model documentation
Overall length L	44.5 mm
Side A length	34.5 mm
Side B length	10 mm

Compare the overall dimensions and mounting points with the documentation for the specific product.

Browse related directory

Specifications

Key system: C2000
Construction: Single-sided euro-profile half cylinder
Operating configuration: Key on one side
Catalogue nominal size: 35/10 mm
Overall length L: 44.5 mm
Side A length: 34.5 mm
Side B length: 10 mm
Catalogue pin count: 5
Measurement reference: Central fixing-screw axis; In the original drawing, B is on the left and A on the right
Housing and plug material: Brass
Cam type: Cam adjustable to 8 positions

Dimensions and installation orientation

For this model, A=34.5 mm, B=10 mm, body L=44.5 mm; Section A is 24.5 mm longer than section B. Tabulated nominal size 35/10 identifies the order; use columns A, B and L for actual lengths.

The original drawing divides the sections at the central fixing-screw axis, with section B on the left and section A on the right. Determine orientation from the escutcheons on both door sides and the operating method; page-left and page-right do not establish inside and outside.

Operating construction and matching components

Key operation on one side; section B is fixed at 10 mm, with a cam adjustable to 8 positions. Check the cam position required by the lock body and the key-side projection; this is not a cylinder accepting keys on both sides.

This model has a cam adjustable to 8 positions; check cam position and lock-body compatibility together with length.

Limitations

A and B follow the orientation of the manufacturer's original drawing and do not directly designate the inside or outside of the door; check the operating side before installation.
Catalogue nominal sizes differ from actual measurements; adding nominal sizes must not replace L.
The original diagram shows only the lengths of the body sections; it is not a product outline, shaft-end machining drawing or installation template.

Sources

CISA English catalogue, PDF page 123 / printed page 119

Manufacturer documents are provided in their original language.

Define Your Requirements Before Choosing a Lock Which Documents Do You Need for a Lock?