Specifications
- Series
- Rotating-bolt lock body
- Drive type
- Mechanical
- Locking construction
- Bolt and latch
- Backset E
- 30 mm
- Faceplate width
- 22 mm
- Faceplate profile
- Flat
- Faceplate material
- Stainless steel
- Cylinder interface
- Euro-profile cylinder ordered separately
- Centre distance
- 85 mm
- Latch adjustment
- 11–17 mm
- Additional locking-point connection
- Prepared for additional locking points; threaded pins connect extension rods
Installation dimensions and faceplate
This model has backset 30 mm, faceplate width 22 mm and centre distance 85 mm. Match the horizontal backset and vertical centre distance separately; door thickness cannot substitute for either.
Locking construction and matching components
The latch positions the door leaf on closing, while the bolt provides locking; during installation, separately check the latch contact surface, bolt strike opening and cylinder operating position. This model is prepared for additional locking points and uses threaded pins to connect extension rods; the catalogue's connecting rods and corner drives must be selected separately for the installation.
This page describes a mechanically operated configuration; if a motor, hold-open device or electric strike is needed, check the applicable models for each accessory.
Limitations
- The dimension diagram only explains the specified dimensional relationships; it is not a product outline, fixing-hole layout or installation template.
- Check strike openings, connectors and suitability for the complete door system against the manufacturer's installation documentation for this model.
Sources
CISA English catalogue, printed page 248 / PDF252 pageManufacturer documents are provided in their original language.