CISA 144228150 Short handle-operated latch lock (Backset 15 mm, faceplate 20 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Construction

Short handle-operated latch lock

Backset E

15 mm

Faceplate width

20 mm

Case finish

Galvanized

Faceplate finish

Galvanized

Case height

85 mm

Latch handing

Non-handed

Latch drive

Handle operated

Installation dimensions and interfaces

Catalogue backset E is 15 mm; faceplate width is 20 mm. Check the two dimensions separately; Measure faceplate width between the left and right outer edges; check the actual backset installation reference against the complete model drawing, without substituting door thickness.

Check door holes against the actual operating components; the appearance of a short case alone does not establish the cylinder or handle interface.

Locking and operating conditions

The latch in this short case is operated by the handle; 85 mm is the case height, not faceplate length. During selection, confirm the handle-hole position on the door rather than only the cylinder position.

Limitations

• Check overall faceplate length, fixing-hole positions and actual strike-opening dimensions against the full installation drawing; the faceplate-width diagram is not a drilling template.
• The catalogue's electric-model voltage and current do not apply to the mechanical construction on this page; this page does not infer a fire rating or a security grade for the complete door.

Sources

Manufacturer documents are provided in their original language.

Related articles