ISEO 7C3A25352 ShutterTop 2.0 Three-point shutter/grille-door lock (Backset 35 mm)

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Series

ShutterTop 2.0

Application

Grilles, shutters and gates

Locking arrangement

Three points

Backset E

35 mm

Faceplate dimensions

350×25×3 mm

Faceplate material

Stainless steel

Rod interface

Preinstalled M8 connectors

Rod throw

25 mm

Operating method

Cylinder-driven

Cylinder interface

Euro-profile cylinder

Rotating hook-bolt throw

28.5 mm

Hook-bolt anti-cut construction

Freely rotating anti-cut pin

Backset and faceplate compatibility

Faceplate dimensions are 350×25×3 mm and backset E is 35 mm. E is the horizontal distance from the faceplate reference to the cylinder operating axis and cannot be replaced by door thickness; faceplate width and thickness must also match the door-edge mortice.

Operating construction and selection

The three-point version has a rotating hook bolt; its 28.5 mm throw and the upper/lower rods' 25 mm throw are distinct dimensions. Check the keeps and rod ends separately. In this configuration, locking is cylinder-driven; distinguish it from the handle-driven version when selecting.

M8 connectors must match the corresponding rods, rod ends and keeps. The 350 mm faceplate length cannot establish compatible door height; also check through-hole positions and the cylinder guard against the complete installation drawing.

Limitations

• The diagram on this page explains only backset, not mounting hole positions; check the manufacturer's drawings for complete keep and connector dimensions.
• Product dimensions and construction do not establish a security grade for the complete door or certification for a particular application.

Sources

Manufacturer documents are provided in their original language.

Related articles