ISEO R6 SPI Cylinder prepared for a thumbturn connection series: connection, basic dimensions and configuration conditions

Cylinder dimensions

Measure both sides from the fixing screw. Check the cylinder profile, cam and version.

Specifications

Scope of information

Construction series; wildcard code is not a complete order number

Construction

Cylinder prepared for a thumbturn connection

Catalogue basic dimensions C/D

30/30 mm

Coding construction

6 coding pins

Cam

30° DIN cam

Driver pin material

Stainless steel

Anti-drill devices

Anti-drill devices at both ends of the cylinder housing (manufacturer description)

Construction version

Compact construction

Prepared shaft projection

16 mm (catalogue diagram)

A prepared connection does not mean a thumbturn is installed

This construction provides a shaft for fitting a thumbturn; the projecting section is marked 16 mm in the diagram. When purchasing, confirm the compatible thumbturn, fixing method and shaft connection. Do not confuse it with the version supplied with a factory-installed round thumbturn.

R6 SPI coding and mechanical construction

This page describes 6 coding pins for R6 SPI, with a key-copy protection device in one pin chamber. Check its compact construction separately from the modular series listed on other pages; do not apply other series' maximum lengths to it.

This page also explicitly specifies stainless steel driver pins, a 30° DIN cam and anti-drill devices at both ends of the cylinder housing (manufacturer description). When checking replacements, confirm the key system, cam and mechanical connection as separate items.

Basic configuration and complete order number

The catalogue Basic configuration row specifies 30+30, with wildcard code 82R86******..*. This row identifies the basic dimensions and code range of this construction; asterisks reserve options requiring further selection.

C and D are measured from the fixing screw centre to the respective ends. Even when the basic configuration has equal side lengths, record the cylinder guards, escutcheons and operating clearance on both sides of the door.

When requesting a quotation, provide the series, operating construction, required C/D, connection and key-system requirements together so the manufacturer can confirm the complete number and final installation drawing.

Limitations

• Asterisks and placeholders in the catalogue code must be completed according to actual dimensions, construction and finish; the code cannot be used directly as an orderable SKU.
• Basic dimensions are only the starting configuration explicitly listed on this page. Check other optional dimensions against the manufacturer's complete configuration rules; not every C/D combination is necessarily available.
• Catalogue construction information does not guarantee current stock, local availability or compatibility with an existing door lock.

Sources

Manufacturer documents are provided in their original language.

Related articles