ISEO R700 S3 Euro-profile round-knob cylinder series: interface, basic dimensions and configuration conditions

Cylinder dimensions

No verified dimensions in this record. Check the manufacturer drawing before ordering.

Measure both sides from the fixing screw. Check the cylinder profile, cam and version.

Specifications

Information scope

Construction series; wildcard code is not a complete order code

Construction

Euro-profile round-knob cylinder

Catalogue basic dimensions C/D

35/35 mm

Coding construction

Up to 14 coding-pin positions

Cam

30° DIN cam

Driver-pin material

Stainless steel

Anti-drill devices

Anti-drill devices at both ends of the cylinder housing and rotor (manufacturer's description)

Anti-bump construction

Special-shaped counterpins (manufacturer's description)

Knob-side and key-side differences

The round knob is on side C in the catalogue drawing. Site records should identify which side faces indoors and check knob-turning clearance from the handle and frame. Swapping side lengths changes knob and key positions; overall length alone is insufficient.

R700 S3 coding and mechanical construction

This R700 S3 page describes up to 14 coding pins and specially shaped paired pins, called counterpins by the manufacturer, for its anti-bump design. This records construction only and does not infer an unverified certification rating.

This page also explicitly specifies stainless-steel driver pins, a 30° DIN cam and anti-drill devices at both ends of the cylinder housing and rotor (manufacturer's description). Check the key system, cam and mechanical interface separately when selecting replacements.

Basic configuration and complete order code

The catalogue Basic configuration line states 35+35, with wildcard code 82R78******.J. This identifies the construction's basic dimensions and code range; asterisks indicate options requiring further selection.

C and D are measured from the fixing screw centre to each end. Even when the basic configuration has equal sides, record cylinder protectors, trim plates and operating clearance on both sides of the door.

When requesting a quotation, provide the series, operating construction, required C/D, interface and key-system requirements together. Have the manufacturer confirm the complete code and final installation drawing.

Limitations

• Complete catalogue-code asterisks and placeholders according to actual dimensions, construction and finish. The code cannot be used directly as an orderable SKU.
• Basic dimensions are only the starting configuration explicitly listed on this page. Check other sizes against the manufacturer's complete configuration rules; not all C/D combinations are necessarily available.
• Catalogue construction information does not guarantee current stock, local supply or compatibility with an existing door lock.
• The page title identifies an asymmetric version while also listing a 35+35 basic configuration. The basic entry alone does not establish both side lengths of a particular product; confirm using the manufacturer's final dimension drawing.

Sources

Manufacturer documents are provided in their original language.

Related articles