ISEO 910205 Vis Security rim lock

Lock and fitting dimensions

Check the backset, centre distance, faceplate and mounting points against the specific model drawing.

Specifications

Locking layout

2 vertical locking points, top and bottom

Inside operation

Key guide hole

Outside pump-cylinder length

50 mm

Top-and-bottom rod connection travel

26 mm

Rod connector projection

35 mm

Rod guide

2 pieces

Outside cylinder sleeve diameter

33 mm

Construction and implications for selection

910205 has a 50 mm-long external pump cylinder and an interior key guide hole. In this configuration, the upper and lower rod connections operate with 26 mm travel. For replacement, first distinguish the locking direction, then check rod-end interfaces or lateral strikes; similar case outlines alone do not allow mixing.

Pre-replacement checklist

When ordering, provide the full model 910205 and check Locking layout: 2 vertical locking points, top and bottom; Inside operation: Key guide hole; Outside pump-cylinder length: 50 mm; Top-and-bottom rod connection travel: 26 mm; Rod connector projection: 35 mm; Rod guides: 2; Outside cylinder sleeve diameter: 33 mm. Also retain photographs of the installation positions of the original lock, strikes and connectors; overall dimensions, hole spacing and travel describe different measurement references and must not replace one another.

Limitations

• Outside cylinder length is not a guaranteed door thickness; subtract the space occupied by inside/outside guards and fixing construction before checking.
• The catalogue does not specify the latch configuration; omission of the word latch does not prove that no latch is present.
• This page is a configuration record from catalogue .42; confirm current supply, replacement models and complete installation conditions with the manufacturer.

Sources

Manufacturer documents are provided in their original language.

Related articles