CISA ASIX 50/30 cylinder with 65 mm adjustable knob shaft (10E307900)

Cylinder dimensions

Measure both sides from the fixing screw. Check the cylinder profile, cam and version.

Specifications

Key system

ASIX

Construction

Cylinder with 65 mm adjustable knob shaft

Operating configuration

Knob shaft

Catalogue nominal size

50/30 mm

Overall length L

79 mm

Side A length

49.5 mm

Side B length

29.5 mm

Catalogue pin count

6

Measurement reference

Central fixing-screw axis; In the original drawing, B is on the left and A on the right

Knob supply

Knob selected separately on request

Shaft-end position

End of section B (original drawing)

Shaft dimension in the original drawing

65 mm; Excluded from body length L

Housing and plug material

Brass

Dimensions and installation orientation

For this model, A=49.5 mm, B=29.5 mm, body L=79 mm; Section A is 20 mm longer than section B. Tabulated nominal size 50/30 identifies the order; use columns A, B and L for actual lengths.

The original drawing divides the sections at the central fixing-screw axis, with section B on the left and section A on the right. The key end is in section A, and the knob-shaft end in section B; Reversing the two section lengths does not produce the same installation configuration.

Operating construction and matching components

The long knob shaft is adjustable and requires inside escutcheon 1.06458.20; select knob series 06353, 06355, 06356 or 06357 separately as required.

Limitations

• A and B follow the orientation of the manufacturer's original drawing and do not directly designate the inside or outside of the door; check the operating side before installation.
• Catalogue nominal sizes differ from actual measurements; adding nominal sizes must not replace L.
• The original diagram shows only the lengths of the body sections; it is not a product outline, shaft-end machining drawing or installation template.

Sources

Manufacturer documents are provided in their original language.

Related articles